Tick an accessory: it goes into the cart with this product.
The Duotone Carve 3.0 SLS is a foil Front Wing available from 800 to 1300 cm², built around a high-performance carbon construction. Expect more speed, snappy rail-to-rail transitions and better lift. We recommend it for surf foil and wing foil. Prone and kite foil riders can use it too.
KEY INFORMATION
DUOTONE Carve 3.0 SLS - Front Wing Foil
What we like
- Optimized Pumping: Extends your flight phases and makes power delivery effortless.
- Increased Responsiveness: Enjoy fast and precise rail-to-rail transitions.
- Speed Control: Improved pitch stability for those high-speed runs.
- Versatility: Perfectly suited for surf, wing, prone, and kite foiling.
- Stabilizer PX: Experience intuitive turns and minimal drag.
Available sizes
Disciplines
Recommended level
Included / Not included
- ✅ Included: Front Wing, protective bag, screw set
Test and review
Duotone Carve 3.0: test and review
Discover the complete test of the DUOTONE CARVE 3.0 wing foils (SLS & D/LAB)
11/08/2025 Read the full reviewDETAILED DESCRIPTION
Improved Pumping and Lift
The Carve 3.0 SLS delivers visibly better pumping efficiency. Holding speed between sections takes less work, and your flight phases run longer. Out at the spot, that means less effort to keep gliding and more ways to build speed back up or link the next section.
Responsiveness and Transitions
Its optimized geometry promotes fast and precise rail-to-rail transitions. You'll feel a lively handling that lets you link tight turns without losing control, which is ideal for surfing waves or attacking maneuvers in wing foil.
Speed and Control on the Wave
This foil is designed to offer more drive and maintain momentum when you're facing the section. The result is that you keep speed to stay ahead of the wave and exploit critical sections more effectively, all while maintaining reassuring pitch stability.
Carbon Construction and Feel
The high-performance carbon construction is light and stiff, and it holds up over time. On the water, this translates into immediate energy transmission, increased handling, and a precise feel that's appreciated in both freestyle and surf foil.
PX Stabilizer and Compatibility
The new Stabilizer PX harmonizes perfectly with the Carve 3.0 SLS to offer smooth acceleration, reduced drag, and intuitive steering. The Carve is compatible with Aero AL and AL 3BS fuselages. You can fine-tune your setup to match your riding style.
Size Options
The range covers 800 to 1300 cm² to meet diverse needs: smaller sizes for enhanced handling and speed, and larger sizes for superior lift and lighter conditions. We recommend choosing the size based on your skill level, body weight, and typical riding conditions.
TECHNICAL SPECIFICATIONS
| Size (cm²) | Wingspan (cm) | Aspect Ratio | Recommended Stab. |
|---|---|---|---|
| 800 | 75 | 7.0 | PX175 |
| 950 | 81 | 6.9 | PX175 |
| 1100 | 81 | 6.7 | PX195 |
| 1300 | 86 | 6.5 | PX195 |
| Specifications | |
|---|---|
| Product | Duotone Wing - Front Wing Carve 3.0 SLS |
| Disciplines | Surf • Freestyle • Prone • Kite |
| Construction | High-performance carbon layup (SLS) |
| Available sizes | 800 • 950 • 1100 • 1300 cm² |
| Recommended Stabilizer | PX160 / PX175 / PX175 / PX195 (depending on size) |
| Fuselage compatibility | Aero AL, AL 3BS |
| Agility | Optimized profiles for rapid rail-to-rail transitions |
| Stability | Improved pitch stability for superior hold at speed |
| Pumping | Optimized pumping efficiency to extend your glide |
| Versatility | Designed for Surf, Wing, Prone, and Kite foil |
| Design | ONE colorway only. |
| Season | SS26 |
| Recommended level | Intermediate to advanced |
| Duotone Wing Reference | 42250-3845 |
| EAN | One Colorway: 800: 9010583253749 • 950: 9010583253770 • 1100: 9010583253756 • 1300: 9010583253763 |
VIDEOS
FAQ
Who is the DUOTONE Carve 3.0 SLS for?
The DUOTONE Carve 3.0 SLS is for intermediate to advanced riders seeking an allround front foil for Surf foil, wing foil, prone, and Kite foil. It suits those who want more pumping and responsiveness, with better speed control.
What are the features of the DUOTONE Carve 3.0 SLS?
The Carve 3.0 SLS offers SLS carbon construction and profiles and curvatures optimized by size, plus a dedicated PX stabilizer. It is compatible with Aero AL and AL 3BS fuselages, and the range runs from 800 to 1300 cm² for different lift.
Which DUOTONE Carve 3.0 SLS size should I choose?
Choose 800 for priority speed and handling (advanced riders), 950 for a speed/control compromise, 1100 for more lift and smooth glide, 1300 for light conditions and stability. Consider your weight and level. Local conditions matter as well.
What are the advantages of the DUOTONE Carve 3.0 SLS?
The Carve 3.0 SLS provides more efficient pumping, very responsive rail-to-rail transitions, better hold and speed on the wave, and precise ride feel thanks to the carbon construction and PX stabilizer.
How to maintain your DUOTONE Carve 3.0 SLS?
Rinse thoroughly with fresh water after each session, regularly check the screw set (recommended torque provided by Duotone), and store the foil away from UV and impacts. Check the carbon layup condition after violent contacts.
What to pair the DUOTONE Carve 3.0 SLS with?
Pair it with the recommended Aero AL or AL 3BS fuselages, and choose a PX stabilizer that matches the size. It works with most compatible Duotone masts and setups.
Why buy from GlissEvolution?
GlissEvolution has more than 20 years of expertise in boardsports. Our passionate advisors test gear at the spots around La Baule and Pornichet. We offer responsive after-sales support based in France, a 2-year warranty, free shipping under conditions from €150, and the option to pick up your order in store in Pornichet.
Oscar
Passionate about wing and sailing for over 15 years, Oscar tests every new model on the spots of La Baule. His technical expertise and pedagogical approach make him the ideal advisor to guide you towards the equipment suited to your level.
To go further
Customer reviews
Loading reviews...









