Data sheet updated in October 2026
The HB Surfkite Legacy Rear Pads camel is a two-piece rear pad designed for strapless Surf. It features thin EVA with a diamond texture, perforations, a rear kick, and 3M adhesive. HB Surfkite, a French surfkite brand, specifically designed this pad for strapless riding. The low thickness EVA keeps you connected to the board. The diamond texture grips your foot even when wet. Perforations lighten the pad and drain water. A kick at the rear braces your foot while surfing. It fits any surfkite, wing, or Surf board. The two-part design adapts to the width of the tail. The camel color is what HB calls Natural. It is also available in gray, in stock.
KEY INFORMATION
HB SURFKITE LEGACY REAR PADS CAMEL - 2-piece strapless rear pad
What we like
- Diamond texture: This diamond-shaped relief grips your foot, even when wet, without wax.
- Thin EVA: Its low thickness means you feel the board directly underfoot, giving you precise control.
- Tail kick: A raised edge at the back braces your foot during turns and landings.
- Perforated: The holes lighten the pad and allow water to drain away.
- 3M adhesive: This adhesive lasts over time, with no peeling at the edges.
- Two pieces: The pad adjusts to the tail's width and conforms to your board's curve.
Available sizes
Color
Camel, called Natural (also available in gray)
Included / Not included
✅ Included: HB Surfkite Legacy camel rear pad, 2 pieces, 3M adhesive
❌ Not included: Front pad, Board
DETAILED DESCRIPTION
A pad designed for strapless riding
HB Surfkite is a French brand specializing in surfkite. Its Legacy rear pad is designed for strapless, where foot pressure is strong and the foot must stay in place without straps. The diamond texture, a rhombus pattern, offers the necessary grip for firm foot placement. The low thickness of the EVA allows for maximum board control.
Thin, perforated EVA with kick tail
The EVA has a low thickness to keep contact with the board. The perforations lighten the pad and let water drain away. At the rear, a kick braces the foot in turns and landings. This prevents the foot from sliding towards the tail during pop or in a tight curve.
Installation and hold
The pad comes in two parts, allowing you to adjust the spacing to your tail's width and follow the board's curve. The 3M adhesive holds strong over time. For installation: ensure your board is clean, dry, and degreased. Position the two parts dry before removing the film, then press firmly for a few minutes. Let it rest for 24 hours before your first session.
Camel color, and gray in stock
This pad comes in camel, HB's Natural color, with the red logo on the edge. The same model is available in gray, also in stock in Pornichet. It pairs perfectly with the brand's Diamond camel front pad, allowing you to equip your entire board in a matching shade.
SIZE GUIDE
| Model | Parts | Color |
|---|---|---|
| Legacy Rear Pads (this pad) | 2 | Grey, camel, black |
| Diamond Front Pad | 3 | Camel |
TECHNICAL SPECIFICATIONS
| Specifications | |
|---|---|
| Type | Rear pad, 2 parts |
| Material | High-quality, low thickness EVA |
| Texture | Diamond texture, perforated |
| Kick | Rear |
| Adhesive | 3M |
| Usage | Strapless surfkite, wing, surf |
| Color | Camel (Natural) |
| Supplier reference | LEGACY-REAR-CAMEL |
FAQ - HB SURFKITE LEGACY REAR PADS CAMEL
Strapless surfkite riders first. It is also for anyone who wants a thin, grippy rear pad on a wing foil board or Surf board, without wax.
Yes. It comes in two parts, so it adapts to the tail width of any surfkite, wing, or Surf board. Clean, dry, and degrease your board. Then let it rest for 24 hours before your first session.
It is thinner for direct contact with the board. Its diamond texture is made for the strong pressure of strapless riding, where nothing holds your foot. This gives you better thickness and grip.
Rinse it with fresh water after your session. Do not use wax or solvents on it. Avoid leaving your board in the sun with the deck facing up.
This pad is in stock in Pornichet. Our team rides strapless surfkite on the coast. They can advise you on installation and positioning on your board. Pick it up at the shop or get fast shipping.
▶ Need advice?
GlissEvolution, 2c avenue du Gulfstream, 44380 Pornichet (Loire-Atlantique)
09 62 64 74 77 | WhatsApp: 07 83 28 39 94, Tuesday to Saturday, 10am-1pm / 3pm-7pm
Test center available by appointment
Customer reviews
Loading reviews...
