Sheet updated September 2026
The Duotone Traction Pad Pro Back 2027 (Blur) is the two-piece rear pad Duotone cuts for the tail of the Blur. It features two pieces of 4mm EVA foam, pre-applied adhesive, and a design that follows the tail of Duotone's all-round Surf board. This is the part you need when your original pad has seen better days.
KEY INFORMATION
DUOTONE TRACTION PAD PRO BACK 2027 (BLUR) - Surf Kite Rear Pad
What we like
- Made for the Blur: The cut follows the Blur's tail. No need to adapt a pad designed for another board.
- Two pieces: The U-shape and the central strip are installed one after the other, making centering simpler.
- Raised kicktail: The back of the pad is elevated, so your back foot finds its support without looking.
- Ready to stick: Pre-applied adhesive; just remove the film and it's on.
- Barefoot grip: Grooved foam means no wax to maintain.
- Same base as the range: The design is based on the rear pad of the Whip, Volt, and Provoke, adapted for the Blur.
Available sizes
Color
C60 Dark Grey, with a turquoise trim on the kicktail
Included / Not included
✔️ Included: 1 two-piece rear pad (outer U and central strip), pre-applied adhesive
❌ Not included: front pad, footstraps, board
DETAILED DESCRIPTION
A unique pad for the Blur
The Blur is the all-round board in the Duotone Surf range, available from 5'3 to 5'9. Its tail design differs from the Whip, Volt, and Provoke models, requiring a specific rear pad, reference 44270-8034. For the other three boards, the reference is 44270-8037.
Kit contents
A U-shaped piece that frames the tail and a central strip, both made of 4mm EVA foam according to Duotone. The adhesive is already on the back side.
Under the back foot
The Blur handles waves of all sizes, whether you're strapped in or riding strapless. Your back foot does all the work in a bottom turn. With its grooved surface and raised kicktail, you'll always know where your foot is, even when the board is moving a lot.
Successful installation
Remove any old adhesive residue, degrease the surface with alcohol, and dry-fit the two pieces. Adhere the central strip first, then the U-shaped piece, pressing from the center outwards. Allow it to dry overnight before returning to the water.
TECHNICAL SPECIFICATIONS
| Specifications | |
|---|---|
| Brand | Duotone |
| Model | Traction Pad Pro Back (Blur) |
| Model Year | 2027 (SS27 season) |
| Target board | Duotone Blur |
| Position | Rear pad |
| Pack composition | 2 pieces: an outer U and a central strip |
| Material | EVA foam |
| Thickness | 4 mm |
| Attachment | Pre-applied adhesive |
| Color | C60 Dark Grey |
| Duotone reference | 44270-8034 |
| EAN | 9010583339719 |
FAQ - DUOTONE TRACTION PAD PRO BACK 2027 (BLUR)
No. Duotone states it is for the Blur only. For a Whip, Volt, or Provoke, you need the Traction Pad Pro Back 2027 (Whip, Volt, Provoke).
A two-piece rear pad, an outer U, and a central strip, made of 4 mm EVA foam with pre-applied adhesive. The front pad is ordered separately.
On a clean, degreased surface, after a dry fit. Apply the central strip first, then the U, pressing firmly. Let it set overnight.
It is not mandatory. If the front pad is also worn, the Duotone Traction Pad Front 2027 is sold separately.
GlissEvolution has been a watersports shop in Pornichet since 2005 and is a Duotone reseller. If you are unsure about compatibility with your board, call us or visit the shop before ordering.
▶ Need advice?
GlissEvolution, 2c avenue du Gulfstream, 44380 Pornichet (Loire-Atlantique)
09 62 64 74 77 | WhatsApp: 07 83 28 39 94, Tuesday to Saturday, 10am-1pm / 3pm-7pm
Test center available by appointment
Customer reviews
Loading reviews...
Read more
Alternative Products
These other products might interest you
