Need a more precise grip without a complicated setup? The ARMSTRONG HYBRID CARBON HANDLES combine a responsive carbon core with a soft EVA grip to keep you in control during long sessions. They install quickly with the Dyna-Link system, which is handy if you often switch between wings.
KEY INFORMATION
ARMSTRONG HYBRID CARBON HANDLES
What we like
- Precise Grip: The carbon core stiffens the handle, delivering direct feedback from your inputs.
- Long-lasting Comfort: The textured EVA grip reduces hand fatigue during sustained sessions.
- Quick Assembly: The Dyna-Link system with Dyneema loops simplifies setup, no rails or screws needed.
- Balanced Positioning: Attachment points are pre-adjusted by size for consistent balance in flight.
Available sizes
Use
Recommended level
Included / Not included
- ✅ Included: 1 pair of handles
- ❌ Not included: XPS Mk II wing (sold separately)
DETAILED DESCRIPTION
What you'll feel
On the water, you'll feel a more direct connection. The carbon core reduces flex, transferring your hand inputs straight to the wing. The textured EVA grip absorbs micro-vibrations and stops your hands from slipping during long sessions. This means you can maintain constant control without a death grip, reducing fatigue. The ride feel is both precise and forgiving, which helps with smooth transitions and adjusting your position while foiling. We recommend these handles if you want a great balance of direct feedback and comfort, letting you ride longer without losing sensitivity.
Sizes and how to choose
Armstrong offers these handles in three sizes, designed for specific wing surface areas: S for 2.0-3.0 m², M for 3.5-4.0 m², and L for 4.5-8.0 m². Choose S if you mainly use small wings in high winds, M for an all-round size, and L for larger wings in low-wind or for Surf. The attachment points are pre-adjusted for each size, helping the wing maintain its natural balance when powered up. If you ride the XPS Mk II, these handles are designed to fit perfectly with no modifications needed.
Construction and materials
The internal core is carbon, with a textured EVA foam coating. This combination follows the Armstrong foils philosophy: stiffness for precision, and a soft surface for comfort. The loops and straps use robust Dyneema, integrated with the Dyna-Link system for a rail-free, screw-free attachment. The grip resists UV, salt, and normal wear, which prolongs its look and performance. The terms carbon, EVA, Dyneema, and Dyna-Link are key, as these materials define the handles' performance and durability.
Installation and Positioning
The Dyna-Link system makes setup simple: just pass the Dyneema loops around the deflated strut, tighten them, and the handle locks in place once the wing is inflated. With no rails or screws, it's easy to swap handles between wings. The attachment points are pre-adjusted by size for stable balance; we recommend checking the loop tension before each session and positioning the handle to suit your front/back hand preference to fine-tune the wing's balance.
On-water behaviour
These handles provide a direct, crisp feel during transitions and turns, thanks to the stiff carbon core. The EVA grip gives a secure hold when the water gets choppy or during repeated moves, meaning less slipping and more consistent pressure from your hands. The pre-set positioning helps keep the wing's handling consistent, which reduces fatigue on long sessions. We recommend this set if you want a great mix of high-performance feel and rider comfort on every session.
Care and durability
The EVA grip is designed to resist UV, salt, and general wear. Always rinse the handles with fresh water after each session to extend the life of the Dyneema loops and the grip. Before inflating the wing, check the condition of the straps and the tension of the attachment points. If the loops show significant wear, replace them to ensure a secure attachment. These simple steps will keep your handles performing well for seasons to come.
TECHNICAL SPECIFICATIONS
ARMSTRONG HYBRID CARBON HANDLES
| Feature | Detail |
|---|---|
| Brand / Model | Armstrong Foils ARMSTRONG HYBRID CARBON HANDLES 2025 |
| Use | Wingfoil / Foil |
| Materials | Carbon core, EVA grip, Dyneema loops |
| Technologies | Dyna-Link system (Dyneema loop attachment) |
| Construction | Internal carbon structure with textured EVA coating |
| Available sizes | S (2.0-3.0 m²) • M (3.5-4.0 m²) • L (4.5-8.0 m²) |
| Armstrong Reference | ZG-PGL-6741 |
FAQ - ARMSTRONG HYBRID CARBON HANDLES
They are for riders looking for a more precise grip and quick setup on inflatable wings, especially those using the XPS Mk II and wing sizes between 2.0 and 8.0 m².
They provide a precise grip from the carbon core, long-lasting comfort with the EVA foam, and a simple setup using the Dyna-Link system and Dyneema loops.
S, M, and L. S for 2.0-3.0 m², M for 3.5-4.0 m², L for 4.5-8.0 m²; choose according to the wing surface area you use.
We bring over 20 years of expertise in watersports. Our passionate advisors rigorously test gear on the legendary spots of La Baule and Pornichet. We offer responsive after-sales support right here in France, a 2-year warranty, free shipping on orders over €150, and the convenience of in-store pickup in Pornichet.
Customer reviews
Loading reviews...
